Catalog
The full catalog, from Patagonia to the field
Nearly a hundred products made and curated for southern Chile's farms. Browse by category and get a quote directly from our team.
Technical catalogues
Catalog
Pipes
-
HDPE PE100 pipe Pressure pipe made from virgin PE100-grade HDPE resin, with carbon black, UV protection and antioxidants to withstand the elements. -
HDPE PE80 pipe PE 80 pipe for pressurised irrigation and fluid transport, manufactured to international standards. -
Feeding pipe HDPE pipe for salmon farming sites. Available 100% virgin or with recycled content. -
LLDPE pipe Pipe made from 100% recovered LLDPE silage film, used for fluid transport. -
Co-extruded pipe Pipe made of 2 layers: recycled HDPE on the inside and, on the outside, a layer of virgin HDPE with colour additive and UV protection.
Catalog
Geomembranes
-
LLDPE geomembrane Semi-flexible sheet eco-designed from recovered silage film, with UV protection and antioxidants. For stall beds, drinkers and feeders. -
HDPE geomembrane Black HDPE sheet with UV additive, ideal for lining ponds. Format: 1.5 to 4 mm thick. -
Coloured geomembrane Virgin-HDPE geomembrane with colour additive and UV protection, from 1.5 to 4 mm thick.
Catalog
Profiles and boards
-
Plastic boards Recycled-HDPE profile with a co-extruded virgin-HDPE layer in a range of colours, mimicking fine timber. High resistance to bending and UV radiation. -
Rectangular profile, 10 × 40 mm (colour layer) -
Semi-oval profile, 22 × 46 mm -
Semicircular profile 70 × 45 mm -
Rectangular profile, 25 × 47 mm (colour layer) -
Rectangular profile, 21 × 68 mm (colour layer) -
Rectangular profile, 30 × 60 mm (colour layer) -
Rectangular profile, 25 × 95 mm (colour layer) -
Board, 13 × 120 mm (colour layer) -
Board, 25 × 100 mm (colour layer) -
Textured board, 25 × 130 mm -
Beam, 50 × 100 mm -
Beam, 50 × 150 mm -
Textured beam 50 × 150 mm
Catalog
Irrigation
Towable irrigation
-
Towable irrigation pipe Flexible LLDPE pipe, designed to be towed across pasture without damage. -
Nelson R2000LP sprinkler Highly uniform irrigation and long reach while working at relatively low pressures. -
Mini pressure regulator Reduces a high inlet pressure to a constant outlet, giving uniform flow and distribution at every sprinkler. Ideal for ½″ Acme rotators. -
Sprinkler base cups Virgin-HDPE cup for towable irrigation lines, with UV inhibitors and antioxidants for permanent outdoor use. -
Hydrant Hydrant with ball valve for towable irrigation systems. -
Tapping saddle Plastic clamp for adding a water outlet to a main line. -
Anka terminal 1½″, female thread Glass-fibre-reinforced nylon fitting for connecting a wide range of polyethylene pipes and hoses. -
Pipe coupling Glass-fibre-reinforced nylon fitting for joining straight runs of polyethylene pipe and hose. -
½″ male Acme × 25 mm adapter Connects the sprinkler and mini pressure regulator to the tapping saddle. -
Threaded metal plug, 1½″ Galvanised iron plug with ring and external thread. -
Camlock coupling, 1½″ Camlock couplings in various types, classified by the design of the male and female parts and the flow direction.
Full-coverage irrigation
-
Senninger SmoothDrive sprinkler High-technology rotary sprinkler that delivers uniform irrigation coverage with a small droplet size. It performs very well in windy areas. Flow rate of 550 l/h at a working pressure of 2.1 bar. -
Xcel-Wobbler sprinkler Sprinkler that uses off-centre rotary action technology, giving a uniform application pattern with low evaporation losses. -
Nelson R2000 WF/LP sprinkler Rotator technology delivers highly uniform irrigation, without riser vibration or the splashing of impact sprinklers. -
Part-Circle rotator R2000WF/LP Spreads water across a 180° arc - designed to irrigate the field corners that full-circle rotators can't reach. -
Riser Riser for full-coverage irrigation lines. -
Sprinkler stabiliser Stabiliser that keeps the sprinkler steady on the irrigation line.
Pipe for irrigation reels
HDPE quick coupling
-
Irrigation pipe with quick coupling PE-80 pipe with quick coupling for full-coverage irrigation, in 6-metre lengths. -
Ball valve with quick coupling Ball valve for irrigation lines with quick-coupling connection. -
HDPE elbow with quick coupling HDPE elbow with quick coupling for direction changes in irrigation lines. -
Tee with quick coupling HDPE tee for branch lines in irrigation systems. -
HDPE reducing tee with quick coupling HDPE reducing tee for combining different diameters on the same line. -
HDPE cross with quick coupling HDPE cross for double branch-offs in irrigation lines. -
Reducer with quick coupling HDPE reducer for stepping down from a larger to a smaller diameter. -
Reverse reducer with quick coupling Reverse HDPE reducer for special line configurations. -
Female end cap Female friction cap for closing off the end of the line. -
Male end plug Male friction plug for closing off the end of the line. -
Metal-to-HDPE transition, female Metal-to-HDPE transition with female thread for joining sections of different materials. -
Metal-to-HDPE transition, male Metal-to-HDPE transition with male thread for joining sections of different materials. -
Transition fitting Fitting for connecting different irrigation systems. Includes quick coupling, male-threaded spigot terminal and pressure clamp.
Catalog
Agricultural products
-
Stall beds Mattress of 100% recycled bonded polyurethane with rubber particles, covered with LLDPE geomembrane made from silage film. Waterproof, easy to clean and repair. -
Pasture feeder Geomembrane feeder that splits in two with an electric fence: feeds cattle on pasture with fewer losses and better ration control. Washable, movable and quick to deploy. -
HDPE drinker HDPE drinker: impact resistance far above that of low- and medium-density polyethylenes. Available in 600 and 800 litres. -
LLDPE drinker Drinker made from 100% LLDPE formulated with silage-bale film. Available in 800 litres. -
Bale rings, for cows and calves Rings for silage, hay or straw bales. Different sizes depending on animal category (adult cattle or growing/pre-breeding calves). Made with 3 profile rings, 11 posts and a 50 cm geomembrane skirt at the base to keep the feed from scattering. -
Hay feeder Designed to hang easily on gates, mesh panels or corral rails, keeping the bale suspended, dry and free from trampling or contamination. -
Rafts Support structure for slurry agitators and pumps. Can be built with pillars that keep the blades from tearing the pond geomembrane. -
Calf shelter Mobile shelter made 100% from HDPE; its dimensions are tailored to the customer’s needs. -
Posts, 3″ and 4″ Plastic fence posts, in different lengths and widths.
Catalog
Other products
-
90° compression elbow, PN16 90° compression elbow for polyethylene pipes. -
90° compression elbow, female thread, PN16 90° compression elbow with female-threaded outlet. -
90° compression elbow, male thread, PN16 90° compression elbow with male-threaded outlet. -
Compression tee Compression tee for branch lines on polyethylene pipes. -
Compression coupling, PN16 Compression coupling for joining lengths of polyethylene pipe. -
Compression reducing coupling, PN16 Compression coupling for stepping down the line diameter. -
Compression end cap, PN16 Compression cap for closing off the end of the line. -
Compression adapter, female thread, PN16 Compression adapter with female thread. -
Compression adapter, male thread, PN16 Compression adapter with male thread. -
Compression valve Valve with compression connection for polyethylene pipes. -
Compression ball valve, male outlet Ball valve with compression connection and male-threaded outlet. -
Compression ball valve, female outlet Ball valve with compression connection and female-threaded outlet. -
Compression adapter with flange Compression adapter with flange for connecting to equipment and valves. - Photo needed Custom-shaped special fittings Custom-shaped fittings made to measure, according to our customers’ needs.
-
HDPE and LDPE welding rod Plastic welding rod for extruders and hot-air welders. Available in HDPE and LDPE. -
HDPE electrofusion fitting Fittings designed to join HDPE pipes permanently, safely and hermetically, using electric current to generate heat. -
HDPE heat-fusion fitting HDPE fittings used to join pipes by applying external heat and pressure.
Catalog
Río Bueno branch
-
Lorentz PS2-100 solar pump Solar pumping system for lifting and moving water with photovoltaic energy, no grid connection needed. -
APm75 peripheral pump LEO APm75 peripheral pump, energy-efficient, with a 24-month warranty. -
APm37 peripheral pump Compact peripheral pump for household and farm flows, with suction lift of up to 8 metres. -
PVC butterfly valve Manually operated valve that regulates flow and shuts it off completely. -
Stub end Injection-moulded HDPE stub end, available in all diameters and pressure ratings. -
HDPE backing flange Backing flange made of HDPE. -
Steel flange Carbon-steel flange for joining pipes, valves, pumps and other line equipment. -
Vinilit PVC adhesive, 60 cc Traditional adhesive for PVC joints, in a 60 cc container. -
Vinilit PVC lubricant Lubricant for assembling PVC joints with rubber ring seals. -
Micro-sprinkler irrigation -
Drip irrigation -
Sanitary plumbing line -
PPR pipe line -
Tapping saddles